MENU
- MOTORHOMES
- CARAVANS
- CAMPER VANS (CUV)
- SERVICE
- BRAND WORLD
MOTORHOMES
CAMPER VANS (CUV)
Knaus Camper vans
SERVICE
The best service
BRAND WORLD
The world of KNAUS
KNAUS BOXLIFE 630 ME
Standard Equipment
* In some cases, figures show equipment features that are not standard.
FIAT basic enginee
| FIAT 2,3 l Multijet 120, Euro 6d-Temp (88 kW /120 PS) – 3.500 kg / Light |
Chassis
| Length cm | 636 |
| Width cm (outer/inner) | 205 / 187 |
| Height cm (outer/inner) | 282 / 218 |
| Mass in running order (kg)* | 2.980 |
| Tecnically maximum authorized laden mass (kg)* | 3.500 |
| Maximum payload (kg)* | 520 |
| Permitted towing load (kg)* | 2.500 |
| Tyres / spare wheel / rims | 215/70 R15 C, 6J x 15" |
| Wheelbase (mm) | 4.035 Overhang |
| Turning circle (m) | 14,2 |
| Seats with safety belt (Number of persons in driving operation) | 4 |
| Beds | 2 / 7 2) 3) |
Exterior
Windows / doors / ventilation
| Seitz S7P frame windows with blinds and mosquito protection | 7 |
| Wet cubicle window | |
| Roof light Midi-Heki (700x500 mm) / Mini-Heki (400x400 mm) | 1 | 1 |
| Mushroom vent Toi-Room |
Interior
Living / sleeping
| Bed size, rear lifting bed with compact bathroom (cm) | |
| Bed size, rear lifting bed with en-suite bathroom (cm) | |
| Bed size, rear bunk bed unterneath with compact bathroom (cm) | |
| Bed size, rear bunk bed unterneath with en-suite bathroom (cm) | |
| Bed size, rear lifting bed lengthwise with compact bathroom (cm) | 188/184 x 173 |
| Bed size, rear lifting bed lengthwise with en-suite bathroom (cm) | 196/184 x 173 |
| Bed size, rear bunk bed lengthwise with compact bathroom (cm) | 193/189 x 184 3) |
| Bed size, rear bunk bed lengthwise with en-suite bathroom (cm) | 202/189 x 184 3) |
| Bed size, spare bed on semi-dinette and driver's seat (cm) | 160 x 60 1) |
| Bed size, Classic lifting bed (cm) | 176 x 130 3) |
| Headroom, manual Classic lifting bed (cm) | 50 |
| Bed size, Vario lifting bed (cm) | 194 x 130 3) |
| Headroom, manual Vario lifting bed (cm) | 100 |
Gas / heating / water / climate
| Gas locker for gas bottle reserves for (in kg) | 1 x 2,7 |
| Heating (incl. 10 ltr. hot water supply) | Truma Combi 6D |
| Fresh water tank, built-in (volume in liters) | 20**/102*** |
| Waste water tank, built-in under floor (liters) | 90 |
Kitchen
| CUV Compressor refrigerator, incl. 7,5 ltr. freezer compartment pluged above level (liters) | 90 |
| CUV Compressor refrigerator incl. 7,5 ltr. freezer, integrated under kitchen unit (liters) |
Toi-Room
| Compact bathroom incl. shower curtain with air ring and extendable shower head | |
| En-suite bathroom with shower cubicle and separate shower faucet | |
| Toilet unit | Cassette toilet rotatable |
FIAT
Chassis
| Fiat Ducato 2,3 l 120 Multijet, Euro 6d-Temp (88 kW/120 PS) |
| Standard painting white |
| Airbag for driver side |
| ABS |
| ESP, Hill Holder |
| Original Fiat captain chair seats with armrests |
| Driver‘s seat adjustable for height |
| Cupholder center console |
| Rear / front axle stabiliser |
| Disk brakes |
| Power steering |
| Height-adjustable headlights |
| Immobiliser system |
| 3-point safety belt system |
| Central locking for driver's cab, with remote control |
| Electrical window winders, front |
| Spare wheel |
KNAUS
Layout plans
Models with 4 seats and 2-7 sleeping berths:
| – 630 ME with option lifting bed (front) |
Car body
| Seitz S7P frame window all round (incl. bathroom window and rear window) |
| Assembly adapter frame for roof hoods |
| Roof hoods: Midi-Heki (700 x 500 mm) + roof hatch (400 x 400 mm) |
| Insect screen door sliding door |
| Sliding door with manual closing aid |
Isolation
| Cold bridge optimized insulation |
| Polyethylene foam closed cell content on side walls and ceiling |
| Floor plate, sandwich construction made of 16 mm Styrodur, poplar plywood and PVC coating |
| Floor thickness 25 mm |
| Temperature controlled intermediate floor seating group |
| Breathable Soft-touch side wall covers |
Furniture design
| Full body construction for more stability/solidity |
| Vertical furniture surfaces with ABS coating |
| Kitchen work surfaces and table suite in CPL (laminate) |
| Aluminium-/Rod profile with round edges |
| Furniture hinges with spring reinforcement |
| Drawers, flaps and doors fitted flush in furniture body |
| Kitchen Drawers open fully with ball bearing guides |
| Ceiling cupboards with handles, rocker arms and softclose |
On-board technology
| 90 ltr. CUV compressor refrigerator |
| 2-flame hob with glass cover, separate washbasin with cover in worktop surface |
| 1 x 2,7 kg gas bottle locker |
| AGM on-board battery (95 Ah) |
| On-board control with digital display for power/water/waste water/battery |
| 12 Volt sockets (1x) + 230 Volt sockets (2x) |
| LED lighting all round (exception: Entrance light + luggage compartment) |
| Water lines routed alongside air recirculation hose (not external shower) |
| Shower tray with minimum 2 drains in compact bath (optional variable size wet cell with minimum 3 drains) |
| Toilet unit rotatable |
| WC disposal tunnel with full cover |
| Charging booster for body battery |
Comfort
| Living area and driver‘s cab seats in original Fiat design |
| Upholstery options: TURIN (FIAT), ENERGY, INDIAN SUMMER, CASUAL SILVER |
| Driver seat and passenger’s seat can be swiveled |
| Dinette seat bench with side pull-out also during the journey, incl. Isofix (3-point Isofix) |
| Dinette table with open access (floating table) can be rotated out, includes a double table top |
| Comfort blind system |
| Space optimisation in bathroom kitchen, living and sleeping area |
| Toilet / shower room with washbasin, cassett-toilet and patented shower curtain |
| Two-layer cold foam mattresses with breathable and durable mattress cover |
| Rear lifting beds with slatted frame |
| Technology module with supply installation and appliance easily accessible |
| Operating elements arranged centrally |
| Kitchen worktop with sink covering in surface optics and foldable extension |
Additional Serials in UK
| 3.500kg Light Chassis instead of 3300 kg light chassis |
| 16" steel rims instead of 15" |
| Alloy rims with standard tyres |
| Spoiler lips in aluminium look (skid plate) |
| Front bumper sprayed in vehicle colour |
| Cruise Control |
| Driver's cab blackout blind with foldable front and side window blinds |
| Air conditioning for driver's cab, manual incl. pollen filter with outside temperature display |
| Airbag for passenger side |
| Height-adjustable passenger seat |
| Steering wheel with radio operating panel |
| Radiator grill in FIAT shiny black |
| Headlights in black frame |
| LED day running light |
| Rear view mirrors, electrically adjustable and heatable |
| Radio DAB+, All-in-One navigations system with camping software, without CD/DVD-drive, antenna, 3 years map update |
| Radio preparation for living area (cable laid incl. 2 loudspeakers) |
| Headup Display |
| Entry step, electric, 70 cm wide |
| Electric heater for Truma Combi 6 D |
| CP-Plus digital heating control panel |
| Truma iNet system |
| Waste water tank insulation hood - heated |
| Water filter system "BWT - Best-Camp mini" |
| Awning (length-dependent!) |
Additional information
x = Standard equipment
– = Not planned technically
• = Optional
* Please refer to the notes and explanations
** Fresh water tank capacity limited to 20 ltr. by overflow valve (recommended driving fill level)
*** Fresh water tank capacity is 102 ltr. with the overflow valve closed
1) Load increase at the factory with screw spring set
2) Spare bed, 180x70cm, at the front, available as option
3) Optional
4) With Option 551983 single bed, the extra bed is omitted