Standard Equipment



FIAT 2,0 l Multijet 115 (85 kW/115 PS – 3.300 kg)
ChassisFiat Ducato
Length cm599
Width cm (outer/inner)205/187
Height cm (outer/inner)258/190
Mass in running order (kg) *2.840
Tecnically maximum authorized laden mass (kg) *3.300
Maximum payload (kg) *460
Permitted towing load (kg) *2.500
Tyres / spare wheel / rims215/70 R15 C , 6J x 15”
Wheelbase (mm)4.035
Turning circle (m)14,2
Seats with safety belt (Number of persons in driving operation)4
Bedsup to 3


Windows / doors / ventilation

Seitz S7P frame windows with blinds and mosquito protection5
Wet cubicle window
Roof light Midi-Heki (700x500 mm) / Mini-Heki (400x400 mm)1 | 1
Roof light Toi-Room 280x280 mm
Mushroom vent Toi-Room


Living / sleeping

Chest of drawers behind driver's seat (instead of seat bench)
Wardrobe plus two cloth bags
Rear bed, lateral, with single-piece slatted frame
Bed size, rear (cm)194x140
Bed size, spare bed on semi-dinette and driver's seat (cm)160x60 [²)]
Bed size, Classic lifting bed (cm)
Headroom, manual Classic lifting bed (cm)
Bed size, Vario lifting bed (cm)
Headroom, manual Vario lifting bed (cm)

Gas / heating / water / climate

Gas locker for gas bottle reserves for (in kg)2x11
Heating (incl. 10 ltr. hot water supply)Truma Combi 4
Fresh water tank, built-in (volume in liters)20**/110***
Waste water tank, built-in under floor (liters)85


Compressor refrigerator, incl. 10 ltr. freezer compartment pluged above level (liters)90
Compressor refrigerator incl. 10 ltr. freezer, integrated under kitchen unit (liters)


Fixed bathroom incl. shower curtain with air ring and extendable shower head
En-suite bathroom with shower cubicle and separate shower faucet
Toilet unitDometic TD 4110



EURO 6 incl. particulate filter
ESP, Hill Holder
Airbag for driver side
Electrical window winders and electrical central locking
Original Fiat captain chair seats with armrests
Power steering with electronic immobiliser
Lashing points in the floor (Storage rear)


Layout plans

4 seats and 2-3 sleeping berths

Car body

Seitz S7P frame window all round (incl. bathroom window and rear window)
Assembly adapter frame for roof hoods (not 280 x 280mm)
Roof hoods: Midi-Heki (700 x 500 mm) + roof hatch (400 x 400 mm)
Insect screen door sliding door
Sliding door with manual closing aid


Isolation without cold bridges
Polyethylene foam closed cell content on side walls and ceiling
Floor plate, sandwich construction using 12 mm styrodur, poplar plywood and PVC coating
Soft-touch side wall covers

Furniture design

Full body construction for more stability/solidity
Vertical furniture surfaces with ABS coating
Kitchen work surfaces, table suite and washstand in CPL (laminate)
Rod profile with round edges
Furniture hinges with spring reinforcement
Drawers, flaps and doors fitted flush in furniture body
Drawers and ceiling cupboards with softclose
Kitchen Drawers open fully with ball bearing guides
Ceiling cupboards with handles, rocker arms and softclose

On-board technology

90 ltr. compressor refrigerator
3-flame hob with glass cover, and separate washbasin with cutting board
2 x 11 kg gas bottle locker
AGM on-board battery (95 Ah)
On-board control with digital display for power/water/waste water/battery
12 Volt sockets + 230 Volt sockets: 3 of each
LED lighting all round (exception: Entrance light + luggage compartment)
Water hoses laid on air circulation hoses > protection against frost
Shower tray with 3 drains in variable size wet cell, with 2 drains in fixed bath
Toilet unit rotatable
WC disposal tunnel with full cover


Living area and driver‘s cab seats in original Fiat design
Upholstery options: Turin, Indian Summer, Energy
Driver seat and passenger’s seat can be swiveled
Dinette seat bench with side pull-out also during the journey
Dinette table can be swivelled out with double table top
Comfort blind system
Space optimisation in bathroom kitchen, living and sleeping area
Lateral fixed bathroom
Two-zone cold foam mattresses with breathable and durable mattress cover
Rear lateral beds with full size slatted frame
Folding slatted frames (exception: lengthwise bed models without locking system)
Appliance and supply installation easily accessible
Operating elements arranged centrally
Kitchen worktop with fold-down extension


Belt system weight-optimised
Dinette bench with side panel reinforcement to improve side impact protection

Additional information

x = Standard equipment
– = Not planned technically

Please refer to the notes and explanations
** The fresh water tank capacity referred to attachment V, part A, ciff . 2.6. Fn. VO (EU) 1230/2012 depending on vehicle type is limited by a circulation valve to 20 ltr. (suggested filling for running order)
*** fresh water tank capacity is 110 ltr. with the overflow valve closed

¹) Load increase at the factory with screw spring set
²) Spare bed, 180x80cm, at the front, available as option
³) Optional
4) With Option 551983 single bed, the extra bed is omitted