Standard Equipment

  600 MQ  


FIAT 2,0 l Multijet 115 (85 kW/115 HV) – 3.300 kg


Length cm599
Width cm (outer/inner)205/187
Height cm (outer/inner)258/190
Mass in running order (kg)*2.840
Technically maximum authorized laden mass (kg)*3.300
Maximum payload (kg)*460
Permitted towing load (kg)*2.500
Tyres / spare wheel / rims215/70 R15 C, 6Jx15"
Wheelbase (mm)4.035
Turning circle (m)14,2
Seats with safety belt (Number of persons in driving operation)4
Sleepsup to 5


Windows / doors / ventilation

Seitz S7P frame windows with blinds and mosquito protection5
Wet cubicle window
Roof light Midi-Heki (700x500 mm) / Mini-Heki (400x400 mm)1 | 1
Mushroom vent Toi-Room


Living / sleeping

Lifting bed rear transverse182x140
Bed size rear bunk bed transverse underneath (cm)180x140 2)
Lifting bed rear lengthways
Bed size rear bunk bed lengthways underneath (cm)
Bed size, spare bed on semi-dinette and driver‘s seat (cm)160x60 1)
Bed size, Classic lifting bed (cm)
Headroom, manual Classic lifting bed (cm)
Bed size, Vario lifting bed (cm)
Headroom, manual Vario lifting bed (cm)

Gas / heating / water / climate

Gas locker for gas bottle reserves for (in kg)1x2,7
Heating (incl. 10 ltr. hot water supply)Truma Combi 6D
Fresh water tank, built-in (volume in liters)20**/102
Waste water tank, built-in under floor (liters)90


CUV Compressor refrigerator, incl. 7,5 ltr. freezer compartment pluged above level (liters)90
CUV Compressor refrigerator incl. 7,5 ltr. freezer, integrated under kitchen unit (liters)


Fixed bathroom incl. shower curtain with air ring and extendable shower head
En-suite bathroom with shower cubicle and separate shower faucet
Toilet unitToilet unit rotatable



Fiat Ducato
EURO 6 incl. diesel particulate filter
Airbag for driver side
ESP, Hill Holder
Original Fiat captain chair seats with armrests
Driver‘s seat adjustable for height
Cupholder center console
Rear / front axle stabiliser
Disk brakes
Power steering
Height-adjustable headlights
Immobiliser system
3-point safety belt system
Central locking for driver‘s cab, with remote control
Electrical window winders, front
Spare wheel

Car Body

Seitz S7P frame window all round (incl. bathroom window and rear window)
Assembly adapter frame for roof hoods
Roof hoods: Midi-Heki (700 x 500 mm) + roof hatch (400 x 400 mm)
Insect screen door sliding door
Sliding door with manual closing aid


Isolation without cold bridges
Polyethylene foam closed cell content on side walls and ceiling
Floor plate, sandwich construction made of 16 mm EPS, poplar plywood and PVC coating
Floor thickness 25 mm
Temperature controlled intermediate floor seating group
Breathable Soft-touch side wall covers

Furniture Design

Full body construction for more stability/solidity
Vertical furniture surfaces with ABS coating
Kitchen work surfaces and table suite in CPL (laminate)
Aluminium-/Rod profile with round edges
Furniture hinges with spring reinforcement
Drawers, flaps and doors fitted flush in furniture body
Kitchen Drawers open fully with ball bearing guides
Ceiling cupboards with handles, rocker arms and softclose

On-board technology

90 ltr. CUV compressor refrigerator with night setback and silent mode
2-flame hob with glass cover, separate washbasin with cover in worktop surface
1 x 2,7 kg gas bottle locker
AGM on-board battery (95 Ah)
On-board control with digital display for power/water/waste water/battery
12 Volt sockets (1x) + 230 Volt sockets (2x)
LED lighting all round (exception: Entrance light + luggage compartment)
Water lines routed alongside air recirculation hose (not external shower)
Shower tray with minimum 2 drains in fixed bath (optional variable size wet cell with minimum 3 drains)
Toilet unit rotatable
WC disposal tunnel with full cover


Living area and driver‘s cab seats in original Fiat design
Driver seat and passenger’s seat can be swiveled
Dinette seat bench with side pull-out also during the journey, incl. Isofix (3-point Isofix)
Dinette table with open access (floating table) can be rotated out, includes a double table top
Comfort blind system
Space optimisation in bathroom kitchen, living and sleeping area
Toilet / shower room with washbasin, cassett-toilet and patented shower curtain
Two-layer cold foam mattresses with breathable and durable mattress cover
Rear lifting beds with slatted frame
Technology module with supply installation and appliance easily accessible
Operating elements arranged centrally
Kitchen worktop with sink covering in surface optics and foldable extension

Additional information

x = Standard equipment
– = Technically not planned
• = Optional

Please refer to the notes and explanations
** The fresh water tank capacity referred to attachment V, part A, ciff. 2.6. Fn. VO (EU) 1230/2012 depending on vehicle type is limited by a circulation valve to 20 ltr. (suggested filling for running order)

) Spare bed, 180x70cm, at the front, available as option
2) optional